Dan Petersen's
professor coyle
Calculator's

                           
       
       
       
  SERIES CAPACITANCE Square Loop to Diameter Equivalence   OHM'S LAW  
                VALUE      
  C1= pF Square side = inches   Resistance (R) = ohms  
  C2= pF Diag. =     Voltage (E) = volts  
        Equiv. Dia = inches   Current (I) =  amps  
  Cp= pF                  
        Area = sq. inches   RESULTS ohms  
          volts  
  CAPACITIVE REACTANCE       amps  
  Capacitance = picofarads     Enter any two values (R & E, I & E or I & R) . The answer will appear in blue in the results column  
  Frequency = Megahertz      
              Power (W) =  watts  
  Cap. Reactance = Ohms     Power (W) =  watts  
                Power (W) =  watts  
       
  INDUCTIVE REACTANCE   Litz Size         Magnet Wire Size   O.D. in Inches     Turns/Inch  
  Inductance = Microhenries         15/44                    29                        .0132                 76  
  Frequency = Megahertz         20/44                    27                        .0155                 65  
                  30/44                    25                        .0182                 55  
  Cap. Reactance = Ohms         40/44                    24                        .0213                 47  
                   165/46                   22                        .0286                 35  
           660/46                   15                        .0555                 18  
       
 

[an error occurred while processing this directive]